Cart
0
No items found.
4 Port HDMI Switch & IR Repeater Combo

With the Inteset 4K HDMI Switch you can hide your devices out of sight in a cabinet or behind closed doors and control which device you want to access. Then you can use your device remote or a universal remote like our INT422 and control the device itself.

$ 31.95 USD
Product Info

With the Inteset 4K HDMI Switch you can hide your devices out of sight in a cabinet or behind closed doors and control which device you want to access. Then you can use your device remote or a universal remote like our INT422 and control the device itself. Both IR signals are carried through the one IR Receiver Cable that is mounted on your TV. When you select devices you are automatically able to use your remote for that device. Only two cables are visible with this set up. The HDMI Cable from the TV to the Switch and the IR Receiver Cable from your TV to the Switch. The Switch and all your devices can be hidden away. Because of the leading edge technology used in the Switch you can use a long HDMI cable from the Switch to the TV. You can also add a 3.5mm Stereo M/F extension to the IR Receiver Cable, if needed. This allows great flexibility in locating your equipment. Other switches have remotes to control only the switching of ports. Those switches must be in line of sight to work. Our switch can be located in a closet and still provide full control of both the switching of ports and the control of the device connected to that port.

Notes

1. This is an HDMI switch not an HDMI splitter. It only supports 4 in 1 out and not 1 in 4 out.

2. It is suggested that the HDMI cables used be of high quality and that the input cable be HDMI 2.0 for best results.

3. When removing the power adapter from a wall outlet, please remove by pulling from the base of the adapter. Do NOT pull from the cord to remove.

4. To obtain the 3D effect, all units connected to the switch's output must support 3D.

5. If your source device is HDMI 2.0 and HDCP 2.2, please set the resolution to 4k at 30hz to use this switch.

6. Be sure to locate the emitter head exactly on top of the IR sensor of the device you want to control.

MORE . . .
LESS . . .